Level III / SLS Nub Mod

Your Price: $32.95
Product Options

The SLS Nub Mod will work with the Level 3 Retention Safariland Holsters that include the SLS hood in addition to the ALS lever. The tapered cut allows the SLS hood to be activated over the Nub, and the grooves help keep your thumb in contact with the lever.

Improves user draw time by allowing the thumb to land on the Nub after releasing the SLS hood.

This Nub will also work with the ALS only holsters.


The reversed angle matches up with the pad of your thumb sooner than the factory button. You will find the gun in your hand just by grabbing it.  Weak side draw becomes much faster as well. 


More Reliable:

The wider release button means you have even less potential to miss the activation, especially on thigh rigs or mounting systems that push the holster away from your body. 

If you have ever found yourself  pulling up on the gun before hitting the release you've noticed that gun is difficult to almost impossible to get out. The additional leverage of the Nub Mod fixes this stress induced or poor training problem if it ever arises due to the increased surface area for the thumb to engage. 



Many find the button too small and glue or plastic weld onto the button to make it larger. This has the potential to make the typical homemade button get pushed over into the body of the holster rendering it inoperable. 

The machined aluminum piece is indexed in part by the outside edge of the factory button. It will not come over the edge of the holster. It is bead blasted then hard anodized.  

Note: Due to variations in holsters and SLS hoods, you may be required to add a washer to your holster in order to ensure that the SLS hood clears the Nub! A washer is included, as well as a larger allen wrench to allow you to un-install and re-install the SLS hood.

Please note the Left handed SLS nubs are a bit snug, the will require you to press them on rather firmly, either by using a cam action starting with the indexing ledge on first, then pressing over the ALS lever, and tightening the other side on, OR simply take a few thousands of an inch of the plastic off the lower ledge of the ALS lever with a file or knife.

Product Reviews

(0 Ratings, 0 Reviews)