ACCU-SHOT: BT10 - ATLAS Bipod

This item or some of it's components cannot be exported from the United States of America.
US Military APO Addresses exempt.

"The Atlas Bipod project has been a long journey, from conception of what a bipod should be to a brief and frank discussion with Mr. Harris at SHOT, where he expressed no interest in adding my concepts to the Harris product line to what we see today as the Atlas bipod.  The Atlas has been tested by professionals and civilians alike, tested in the sands of Iraq and found to not foul, tested in a Red Bull induced shooting session and survived.  The new V8 Atlas is ready for you."

The NEW V8 has the following features:

• Construction from T6061 Aluminum, Type III Hard Anodized black
• Stainless steel springs and fasteners
• UHMW components used for smooth tracking
• 15 degrees +/- of preloaded Pan
• 15 degrees +/- of preloaded Cant
• Preload on Pan and Cant can be tightened by means of the knurled knob
• Picitinny Rail Mount interface by either standard machine screw fastener based clamp or optional ARMS 17S lever mount (offered with the ADM Throw Lever on the BT10-LW17 but any lever mount with that same hole spacing will work on the BT10-NC).
• Leg positioning is possible by using either hand to move the legs into any of the five leg positions; legs stowed back, 45 degree back, 90 degrees straight down, 45 degrees forward and stowed forward.
• All 5 leg positions are maintained by push button heat treated stainless steel components allowing the shooter to load the bipod at any of the three deployed positions.
• Non orientated leg length adjustment, Outer leg slides on the Inner leg locating on any of five positions ¾" apart and can be done by either hand.
• Optional 3" leg extensions to increase height available.
• Standard soft durable Rubber feet that are suitable for many surfaces.
• Optional interchangeable Ski and Cleat style feet can be swapped in the field with the press of a ball plunger with a bullet tip.
• Optional mounting systems available for Accuracy International and soon to be released Sako TRG rifles.
• Estimated range of elevation on the BT10 is 5-9" from the surface up to the rail.
• Estimated weight of 10.6 ounces for the clamp on style
• Proudly Made in America

All of the Atlas bipods have the same functionality; they only differ in the mounting hardware configurations as noted below;

1. BT10 - Atlas Bipod  - Standard two screw clamp on style
2. BT10-LW17 - Atlas Bipod  - Lever Mount With ADM Throw Lever Mount
3. BT10-NC - Atlas Bipod  - No Clamp, takes any ARMS 17S lever mount and mounts directly to Accuracy International and Sako TRG Style Spigot mount BT19.